SUPER MICRO Computer 6113L-i, 6113L-8 user manual Glan Enable/Disable, Watch Dog Enable/Disable

Chapter 5: Advanced Serverboard Setup

GLAN Enable/Disable

Change the setting of jumper J7 to enable or disable the onboard GLAN ports (GLAN1 and GLAN2) on the serverboard. See the table on the right for jumper settings. The default setting is enabled

GLAN

Enable/Disable

Jumper Settings

(J7)

Jumper
Position	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

Watch Dog Enable/Disable

J31 controls Watch Dog, a system monitor that takes action when a soft- ware application freezes the system. Jumping pins 1-2 will have WD reset the system if a program freezes. Jumping pins 2-3 will generate a non- maskable interrupt for the program that has frozen (requires software implementation). Watch Dog must also be enabled in BIOS.

Watch Dog

Jumper Settings (J31)

Jumper

Position Definition

Pins 1-2 WD to Reset Pins 2-3 WD to NMI

Open Disabled

Power Fail Alarm Enable/ Disable

The system will notify you in the event of a power supply failure. This feature assumes that redundant Supermicro power supply units are installed in the chassis. If you only have a single power supply installed, you should disable this (the default setting) with CN5 to prevent false alarms. See the table on the right for jumper settings.

Alarm Reset

Jumper Settings

(CN5)

Jumper
Position	Definition
Open	Enabled
Closed	Disabled

5-23