SUPER MICRO Computer 6113L-i user manual Installing/removing hot-swap Scsi drives 6113L-8 only

Chapter 6: Advanced Chassis Setup

2.Installing/removing hot-swap SCSI drives (6113L-8 only):

The SCSI drive bays are located in the front of the chassis, making them easily accessible for installation and removal. The SCSI drives are hot-swap units, meaning that they can be installed and removed while the system is running. To remove a SCSI drive, first push the colored release button located beside the drive's LEDs, then swing the handle fully out and use it to pull the SCSI drive carrier straight out (see Figure 6-5).

Figure 6-5. Removing SCSI Drives

Important: All of the SCSI drive carriers must remain in

!the drive bays to maintain proper cooling airflow.

6-7