16English
Pausing a session
1Press the on/off button or press the minus button to reduce the intensity to 0%.
,, The remaining minutes of the session are still shown on the display.
2Press the on/off button to continue the session or press any of the touchscreen buttons to end the session.
Note: If you pause a session while the appliance operates on battery power and do not continue the session within 5 minutes, the appliance turns off automatically.
Setting the alarm
The alarm has three modes: chime only, light only or both chime and light.
1Press the on/off button briefly to turn on the appliance (Fig. 6).
,, The touchscreen display goes on.
2Press the alarm button (Fig. 12).
,, The alarm indications start to flash (Fig. 13).
3Press the plus or minus button to switch between the three alarm modes: chime only, light only or both chime and light (Fig. 9).
4Press the alarm button twice or wait 10 seconds to store the selected mode.
5To set the alarm time, press the alarm button twice.
,, The alarm time starts to flash.
6Press either the plus or the minus button to set the desired time. If you keep the button pressed, the time moves forward or backward quickly.
7Press the alarm button or wait 10 seconds to store the set alarm time.
Note:The set alarm mode and time remain stored in the memory as long as there is energy in the battery.
