Philips HF3331, HF3332 manual English, Charging, Installation

12English

-- If mornings or evenings do not seem to be the problem, but you feel generally tired during the day, then the time at which you use the goLITE BLU is not as important.You can use the goLITE BLU in the morning or around midday. For example, when you wake up in the morning, use it for 15 to 30 minutes and then again at midday or in the evening for approximately the same amount of time. Place the goLITE BLU further away from you during the evening session. Do not use the goLITE BLU within two hours of your desired bedtime or you may not be able to fall asleep.

Charging

Note:You can also use the appliance while it is charging.

The goLITE BLU energy light comes with a 9.5V AC/DC adaptor that operates on voltages ranging from 100 to 240 volts to allow worldwide use.The adaptor comes with a set of exchangeable adaptor

plugs that fit most common worldwide wall outlets (model HF3331 only).

1Put the adaptor in the wall outlet.

2Insert the appliance plug into socket on the appliance (Fig. 2). ,, Only the outline of the charge indication is visible.

,,  As the battery charges, the four bars of the charge indication flash one by one and fill as the charge increases.

,, When the battery is fully charged, the charge indication stops flashing.

Note: Charge the goLITE BLU at least 8 hours before you use it for the first time. Charging normally takes 3 to 4 hours.

Note:When the battery is fully charged, it contains enough energy for 3 to 5 sessions.

Installation

1Remove the stand from the stand storage cavity (Fig. 3).

2Insert the bevelled end of the stand into the hole on the back of the appliance. Magnets hold the stand in place (Fig. 4).