Memorizing the Channels (continued)
DTV Signal Strength
You can make use of DTV signal strength bar to check how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The stronger the signal strength, the less likely you are to experience picture degradation.
Navigate to the CHANNEL SETUP menu, at the bottom of the menu screen the Signal Strength bar is displayed indicating the level and quality of signal that is received by the unit for the current DTV channel.
CHANNEL SETUP | |
TV Source | AIR |
Current Channel | |
Channel Label | WGBH- |
Channel Skip | OFF |
Favorite Channel | OFF |
Auto Search | > > > |
Input Select | > > > |
Signal Strength |
|
Channel Label Setup
If required, you can give a name to the programs. (Only for analog channels)
1 Navigate to the CHANNEL SETUP menu and highlight Channel Label.
2 Press OK to enter into channel label editing mode.
Use 3/4to move the cursor, use 5/6to select character. Press MENU to exit the editing mode.
3 Press EXIT button to return to TV viewing.
Note: the names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users.
CHANNEL SETUP | |
TV Source | AIR |
Current Channel | |
Channel Label | ABCD- |
Channel Skip | OFF |
Favorite Channel | OFF |
Auto Search | > > > |
Input Select | > > > |
Signal Strength |
|
Favorite Channel Setup
You can create a favorite channel list into memory as follows:
1 Navigate to the CHANNEL SETUP menu.
2 Highlightchannel. Current Channel item, use 3or4to select your favorite
3 | Highlight Favorite Channel item, use 3or4to select ON. |
4 | Repeat the above steps to set more favorite channels (up to 10 |
| channels) |
5 Now a favorite channel list is created, and you can make use of it to quickly select your favorite channel.
Press FAVORITE button to call up the Favorite channel list, use 5/6to highlight the channel, use OK to select that channel.
CHANNEL SETUP | |
TV Source | AIR |
Current Channel | |
Channel Label | WGBH- |
Channel Skip | OFF |
Favorite Channel | ON |
Auto Search | > > > |
Input Select | > > > |
Signal Strength |
|
21
