FRS (MODE)
CHANNEL SELECT
CTCSS SELECT
POWER SELECT
ROGER BEEP
(oF,
(on or oF)
NOTE: To differentiate between operating modes, look for HI or LO indication below the battery power level indicator when in FRS mode.Refer to the appropriate section of this manual for de- tailed operating instructions for each mode. Channels 1 through 14 are shared FRS only,
Controls:
Power On-Off/SCAN Button (13)
Press and hold the PWR on/off button for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds.
Adjusting the Volume (11, 10)
With the unit powered on, press the Up Channel/Volume button ( 
) to increase volume and the Down Channel/Volume button ( 
) to decrease
8
128-6675
8 of 24
