10.Press the Up or Down button until +TX appears flashing; then press the Monitor (M) button to confirm the alarm transmit setting.
NOTE: This mode will only operate if the radio ID is enabled on and the unit’s temperature triggers a temperature alarm.
TIME MODE
The Time mode provides you with a reliable clock which not only indicates the
1.From the GMRS TWO WAY mode (CH and CODE displayed), press the Function(F) button 5 times; TIME is momentarily displayed, followed by the indication in AM or PM.
2.To set the clock to a 12 hour display, press the right menu button once; the hours digits will flash. (To access the 24 hour display, press the Up or Down buttons until the AM/PM indication disappears from the display; then proceed with the hour/minute setting.)
3.Press the Up button or Down button; the hour indication will change between 1 and 12 accordingly. As the hour indication passes through 12 noon, the AM indication changes to PM.
4.When the hour is set, press the right menu button again; the minutes indication will flash.
5.Press the Up or Down button; the minutes indication will change between 00 and 59 accordingly.
6.Press the right menu button again; ALARM will appear with ON or OFF
flashing, together with the alarm icon ( 
).
7.Press the Up or Down button to set the alarm ON or OFF as desired.
8.If ON is selected, use the right/ left and Up/Down buttons to select the desired time of alarm in the same manner as
9.After all time functions have been selected and entered, press the Monitor (M) button to confirm.
When the alarm time is reached, the unit will repeat four short beeps at
20
