To set the Dual Watch Mode:
-From GMRS standby mode, press the MODE button 4 times; the DW icon flashes on the display. If the dual watch mode is off, the oF icon will also appear flashing.
-To enable the dual watch mode, press the Up or Down button; the dual watch channel number will flash and start to increment up or down as the Up or Down button is pressed.
-Press the MODE button again to select the CTCSS function and select the CTCSS code if desired for the dual watch channel just selected.
-Press the PTT button to confirm selection of the dual watch channel. The display will now alternate between the primary channel and the dual watch channel just selected.
To exit the dual watch mode, repeat the above procedure, decrementing the channel number until oF appears; then press the PTT button to confirm. NOTE: When in Dual Watch mode, the vibration alert function is
disabled.
Transmit Power Selection Mode
This feature permits selection of the transmitting power level to high or low. Using low power, the unit will have a lower transmit range but bat- tery life will be increased.
To access the transmitter power selection function:
-From GMRS standby mode, press the MODE Button 5 times until the Po icon appears with a flashing HI or Lo indication on the display.
-Press the Up or Down button to toggle between the HI and Lo selections.
-Press the PTT button momentarily to confirm selection.
The display will indicate the current setting in GRMS standby mode.
13
