-While standing outside in an open area, hold the unit horizontal and parallel to the ground. Rotate yourself and the unit 360 degrees, taking at least 15 seconds for each
-Press the PTT button to complete calibration.
The calibration data will be stored in the transceiver memory until
Battery Alert
When the battery icon ( ) blinks on the LCD panel (battery voltage below 4.9 V), recharge unit or install fresh batteries. If the batteries are not replaced, the LCD display will slowly fade until data disappears.
Batteries
There are two methods of powering the
1.Alkaline Batteries - (5 x AA size)
2.Rechargeable
NOTE: To extend battery life, avoid overcharging the batteries.
19