Specifications

Video System:

NSTC Analog Composite Video (1V P-P, 75Ω)

A/V Switching:

3 channels

Power:

10-16 VDC, Negative Ground

Aux Audio Outputs:

Left and Right Variable (800mV max, 8Ω load min.)

Left and Right Fixed (300mV typical, 600Ω load min.)

Current Consumption (stand-by mode):

67mA

Current Consumption (on, but no VCP):

635mA

Current Consumption (with one VCP on):

1.5A

Audio Noise Floor (30KHz BW):

1.164mV (-58dB re:1V)

THD+N @ -10dBV, 1KHz (30KHz BW):

0.356%

Cross talk @ 1KHz:

60dB

Maximum Input Level, Audio L and R:

800mV

Frequency Response, 20Hz – 20KHz:

±1.5dB

Frequency Response, 40Hz – 16KHz:

±0.5dB

Channel Balance:

±0.5dB, 0.05dB Typical

Volume Control:

Dual 64 position log taper w/true 1dB/step accuracy

Unit Weight:

8.5 lbs.

Audio Output Min. Load Requirement:

4Ω

Note: Specifications are subject to change without notice.

Tuner cable ready when used in conjunction with other remote control from accessory list.

Warning

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen

that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible directly or indirectly, to the driver while operating the vehicle. This product should only be installed to the rear of the back of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.

12

Page 12
Image 12
Audiovox LCM1331FDW installation manual Specifications