Radio
Listening to radio
If the unit is not yet in radio mode:
☞Press RADIO.
Select waveband
In radio mode:
☞Press RADIO again.
☞Select the desired waveband and press the right
rotary control.
✎ The following wavebands are available: FM A, FM B, FM AST (Autostore).
Six stations can be stored for each waveband.
FM AST and AM AST can only be stored with the Autostore function.
Setting stations
Stations can be set or searched for in various manners:
Automatic search
☞Turn the right rotary control to the right or left in order to tune to the next
station with a strong signal in the currently selected waveband.
✎If “TA Scan” is activated, the radio will search only for stations from which
traffic announcements can be received.
✎If “TMC Scan” is activated, the radio will search only for stations from which traffic
information can be received.
Scanning receivable stations – SCAN
☞Press the right rotary control in order to briefly play all the receivable stations in the
currently selected waveband.
☞Press the control again in order to stop the scanning process.
✎ The playing time for the scanning process can be adjusted. See “INITIALIZATION”
➽ page 29.
Setting frequency manually
☞Activate “Manual tuning” in the radio menu. ➽next page.
☞Slowly turn the right rotary control to the right or left in order to change
the reception frequency step-by-step.
☞Turn the control quickly by a few notches in order to start a fast search. Press
the control to stop the search.
☞Press the control again to return to the automatic search.
✎After 50 seconds, the radio switches back to automatic waveband tuning.
22
RADIO
6RADIOFM AST
13:29