Via point input
If you wish to visit other locations en route to the
entered destination address, these can be stored as
via points. The navigation system then plans the route
to include the via points in the given sequence before
the destination address is reached.
When you reach a via point, you will hear “You have
arrived.” The navigation system will immediately
begin to plan the route to the next via point or the
final destination.
In the address manager or on the “Via points” information screen you can delete
via points you have not reached yet or which you do not wish to visit any longer. See
page 41 or 49.
☞In the main control, select “Via point input”
:The “Via point input” menu appears.
The following options are available in the “Via point input” menu:
New address
Input country, city, road, number or intersection or special facility as via point.
Load address
Loading an address stored in the address book as a via point.
Last destin.
Recall one of the 20 addresses last used for guidance to load as a via point.
Info on car pos.
Loading a special facility in the vicinity of the current position of the car.
Long-/ Latitude
Entering a destination by means of GPS coordinates (geographic latitude and longitude).
Travel info
If you have enabled a C-IQ Travel Info product (e.g. Varta, Michelin, etc.) you can search
specifically for particular facilities and transfer them directly as the via point. Detailed
information about advanced search options can be found in the Travel Info brochure
supplied with the map CD.
The input of a via point is identical to the input of a destination address.
NAVIGATION
40