Special facilities in the vicinity of the current position
You may also set a destination address by selecting a special facility in the vicinity of
the current vehicle location.
Select “Info on car pos.” in the destination input menu.
:A list of categories of special facilities is shown.
Select the required category.
:A list of facilities pertaining to the selected
category, located in the vicinity of the current
vehicle location, appears. Additionally, distance
and direction to the facilities are shown.
Proceed as described on the previous page.
Note:
You will always see a list of facilities from “Info on car pos.”, even if there is no
facility from the selected category directly at the car position.
The facilities list is sorted by distance to the car position, i.e. the facility closest to the
car position will be first in the list.
Destination input via GPS coordinates
If you know the GPS coordinates of a destination, you
may enter them directly.
In the main menu, select “Destination input
Select “Long-/. Latitude” in the “Destination
input” menu.
:The GPS coordinates input menu appears.
Mark the desired coordinate using the cursor. Con-
firm by pressing the right rotary control.
Next, set the required values for degrees, minutes, seconds and north/south or
east/west. Confirm the destination input with “OK”.
:The navigation system compares the GPS coordinates you entered with the data on
the current map CD and plans the route.
Notes:
If the destination is beyond the digitized roads, the system will guide you along digitized
roads as far as possible. The system will then display the linear direction and the
distance to the destination.
If the GPS coordinates you entered should be outside the limits of the current map CD,
the system will display an error message.
NAVIGATION
39
Train station
AMTRAK SACRAMENTO
17 km
AMTRAK SUISUN CIT
26 km
Quit
Long-/Latitude
OK
115°09'43" West
36°14'21" North