Route selection
During guidance, you may also modify the route criterion and activate or deactivate
dynamic route planning. The system will then plan a new route taking into account
the new setting of the current position of your car.
☞In the guidance screen, select the symbol for route selection (on the basis of the set-
ting in the destination input U,V,Wor X).
The following options are available:
–Dynamic route: This option is not available in the U.S.
–Fast: If you prefer a fast route
–Short: If you prefer a short route
–Main roads: If you prefer expressways
–No main roads: Avoids expressways
In addition, you can bypass toll roads when planning your route.
☞Activate the “Minimize tolls” option if you wish to avoid toll roads as much as
possible.
:A check mark appears in front of the option.
✎If no toll-free roads are available, toll roads will be included for planning the route.
Note: If this option is activated, route planning may take longer than the time needed
with this function deactivated. Therefore this option should only be activated if needed.
NAVIGATION
45