Audiovox P-87S manual CD Changer Controls

CD CHANGER CONTROLS

Built into this unit are controls to operate an optional CD changer. Please check with your Prestige car stereo specialist for recommendations of the models that will work with this unit.

Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio and cassette play. The following controls will operate the CD changer when it is installed and connected to this unit. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.

cq MODE SELECTOR

With the CD changer connected to the unit, this button is used to select CD changer operation. To choose CD mode, press the button until the indication “CdC” appears on the display panel. The display will then change to indicate the disc number and track number. Press the Mode button again to change back to radio or tape operation.

cr & cs DISC SELECT (D+) (D–)

These buttons are used to select the desired disc for play. To advance to a higher number disc, press the “D+” button cr. To return to a lower number disc, press the “D– ” button cs. The number of the selected disc in play will be shown on the display panel.

ct TRACK SELECT

These buttons are used to quickly select the beginning of a particular track. With each momentary tap of the Forward Track Select button (+), the next higher track number will be selected as shown on the display panel. Similarly, with each momentary tap of

the Backward Track Select button (– ), the next lower track number

-9-

will be selected.

cu CUE/REVIEW FUNCTIONS

High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue button (+) to advance rapidly in the forward direction or the Review button (– ) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on the display panel.

dl PAUSE/PLAY SELECTOR ( II )

During disc play, press this button to temporarily stop play of the disc (“PAUS” indication will flash on the display panel). Press the button again to resume play of the disc from the point at which it was stopped. Pause mode will also be canceled by activating the Disc Select cr& cs, Track Select ct, or Cue/Review cufunctions.

dmTRACK/DISC REPEAT (RPT)

When the Repeat button is pressed, play of the selected track will be continually repeated (“RPT” will appear on the display panel and “TRK” will flash). The Track Repeat mode will be canceled by pressing the Repeat button again (“RPT” will disappear from the display panel and “TRK” will stop flashing) or by activating the Shuffle dn or Scan do functions

When the Repeat button is pressed and held longer than 2 seconds, play of the selected disc will be continually repeated (“RPT” will appear on the display panel and “DISC” will flash). The Disc Repeat mode will be canceled by pressing the Repeat button again (“RPT” will disappear from the display panel and “DISC” will stop flashing) or by activating the Shuffle dnor Scan dofunctions.