Audiovox P-87S manual bs REWIND BUTTON REW REWIND MUSIC SEARCH SYSTEM, bt PROGRAM SELECTOR PROG

To stop Fast-Forward movement, press the Program Selector button btand normal play will resume.

bs REWIND BUTTON (REW)

REWIND MUSIC SEARCH SYSTEM

A momentary press of this button will activate the Rewind Music Search System function (“MSS”, moving bars and flashing “1” will appear on the display panel). The unit will automatically rewind to the beginning of the present selection and begin play. To search for a particular selection, tap the button until the respective number (up to 9) flashes on the display panel. For example, to move backward 3 selections from the present point on the tape (including the present selection), tap the button 3 times until the number “3” flashes on the display panel. The unit will rewind 3 selections and begin play. To stop Music Search function at any point, press the Program Selector button bt or tap the Fast-Forward button br to reduce the number of the selection being searched.

Pressing and holding the Rewind button for longer than 0.5 seconds will cause the tape to continually move in the reverse direction of play (moving bars will appear on the display panel). To stop Rewind movement, press the Program Selector button bt and normal play will resume.

bt PROGRAM SELECTOR (PROG)

Press this button to manually reverse tape direction and play the other side (program) of the cassette. The change of direction will be shown by the “1” or “2” indication on the display panel.

bu EJECT BUTTON ( )

Tape playback is stopped and the cassette is ejected by pressing

this button. Radio or CD changer operation will automatically

-6-

resume when the cassette is ejected, depending on which mode was in operation prior to cassette play.

NOTE: Never leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism of the unit. Always press the eject button and remove the cassette before removing the detachable front panel.

cl RADIO MONITOR (RM)

This feature allows you to listen to the radio section of the unit during Fast-Forward or Rewind of the cassette. To activate the function, press the Radio Monitor button so that the “RM” indication appears on the display panel. Deactivate the function by pressing the button again so that “RM” disappears from the display panel.

cm TAPE REPEAT PLAY

When the Repeat button is pressed during tape play, the “RPT” indication will appear on the display panel and play of the present tape selection will be repeated until the Repeat Play mode is canceled by pressing the button again (“RPT” will disappear from the display panel). Repeat Play mode will also be canceled by activating the Fast-Forward br, Rewind bs, Program Selector bt, or Scan cofunctions.

cn BLANK SKIP (BS)

When the Blank Skip button is pressed during tape play (“B.SKIP” will appear on the display panel), the tape will automatically fast- forward to the beginning of the next selection whenever a blank section of longer than 8 seconds on the tape is detected. To turn the Blank Skip feature off, press the button again (“B.SKIP” will disappear from the display panel).