Audiovox P-87S manual 7FRONT/REAR FADER CONTROL, 5TREBLE CONTROL, 6LEFT/RIGHT BALANCE CONTROL

indication is flashing. Within 5 seconds of choosing the Bass mode, press the + or – side of the button of the Level control 2to adjust the bass response as desired. The bass level will be shown on the display panel from a minimum of – 7 to a maximum of 7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

display to a maximum of “0L R9” (full right). Adjusting the balance toward the left will increase the number on the left side of the display to a maximum of “9L R0” (full left). The display will automatically return to the priority indication 5 seconds after the last adjustment or when another function is activated.

7FRONT/REAR FADER CONTROL

5TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing the Select button 3 so that the level number above the “TRE” indication is flashing. Within 5 seconds of choosing the Treble mode, press the + or – side of the button of the Level control 2to adjust the treble response as desired. The treble level will be shown on the display panel from a minimum of – 7 to a maximum of 7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3so that the “BAL” indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the + side of the button of the Level Control 2 to adjust the stereo balance to the left channel speakers or the – side of the button to adjust it to the right channel speakers. When the volume level between the right and left channels is equal, “0L R0” will be shown on the display panel. Adjusting the balance toward the right will increase the number on the right side of the

-3-

To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button 3so that the “FAD” indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the + or the – side of the button of the Level Control 2to adjust the front-rear speaker levels as desired. When the level of the front and rear speakers is equal, “0F R0” will be shown on the display panel. Adjusting the fader toward the front speakers will increase the number on the left side of the display to a maximum of “9F R0” (full front). Adjusting the fader toward the rear speakers will increase the number on the right side of the display to a maximum of “0F R9” (full rear). The display will auto- matically return to the priority indication 5 seconds after the last adjustment or when another function is activated.

8LOUDNESS CONTOUR (LD)

Pressing this button for longer than 2 seconds will activate the Loudness Contour as indicated by “LOUD” on the display panel. When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Pressing the button again for longer than 2 seconds will deactivate the feature and “LOUD” will disappear from the display panel.