As a result, the display backlight will turn off 20 seconds after this selection is entered, provided no other button is pressed in the meantime.

Audio Level

This feature allows the user to set the audio output signal level (see Figure 12). Upon entering the audio level mode, a horizontal bar graph is displayed with a minus (-) sign on the left and a plus (+) on the right. Use the Rotary/Select Knob to adjust the audio level. When the Rotary/ Select Knob is turned CW the audio level signal is increased. When the Rotary/Select Knob is turned CCW the audio level signal is decreased. The UP and DOWN buttons on the Remote Control also provide a similar function. When the desired setting is achieved, press the Rotary/Select Knob or (XM) Select Button on the Remote Control to confirm.

NOTE: To prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the audio level signal to mid-range.

SScreendidisplayed when the

Screen displayed when FM

FM Frequency is set to OFF

Transmitter is set to “ON”

Figure 12. Audio Level Screen

24

Page 24
Image 24
Audiovox Satellite Radio Receiver manual Audio Level Screen