Audiovox TV Cables manual Snap-ln Adapter, FonD#4313,Page, Nguu, Nguh ~.~

~nchoring Cable Assembly I

There are three (3) types of connectors used to anchor

the Cable Assembly:

A. Snap-ln Adapter

B. General Motors Blank Anchor

C. Threaded Tube Clamp

A. Snap-ln Adapter

I. To use the Snap-ln Adapter, it will

be necessaryto fonn threads on the end of the Cable Assembly. This is easily accomplished by placing the 114" -10 Nut on the end of the Cable Assembly with your fingers. Then use a 7116" box end wrench and turn clockwise until the desired amount of threads have been Conned.(Figure 19)

2.After the threads have been formed, screw the Snap-ln Adapter on to the Cable Assembly. (Figure 20)

NOTE: Cable Assembly must extend past the end of the Snap-In Adapter on all applications.

3.The Snap-ln Adapter snaps into the square hole of the Enension Bracket (Figure 11) or snapsinto an existing squarehole on the vehicle -common on GM vehicles.

(Figure 21)

FonD#4313,Page 14

114" x 29

~

			Cable
	---7116" Box
	End Wrench
OZ~~~~:=		1-3/8"-1-1/2"	Formed Threads
nGUU	19
Cable	Assembly
MUST	Extend		Snap-In
Put	Adapter		Adapter

nGUH 20

:~."'""~