Audiovox UMP9020 owner manual CD-R and CD-RW Capability, Technical Specifications

UMP9020

SPECIFICATIONS

CD-R and CD-RW Capability

Depending on media type and method of "recording/burning", some CD-R/RWs may be incompatible with this unit. After "recording/ burning", the session must be closed. Please refer to your software's recommended procedures for closing a disc/session. Review your recording software to familiarize yourself with the correct "recording/burning" procedures. We recommend using the latest versions of

ROXIOTM or NEROTM burning software.

In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio), .MP3 and

.WMA formats "recorded / burned" onto a CD- R/RW. This unit does not support .WAV, .OGG or other formats.

Technical Specifications	AM Tuner
	Tuning Range: 530kHz - 1710kHz
	Sensitivity @ 20dB Signal to Noise: 30uV
	Frequency Response: 30Hz - 2kHz, -3dB

General

Power Supply: 11 to 16VDC, negative ground

Fuses: Battery - 15 amp/ATO, Ignition/ Accessory - 0.5 amp AGC

20 pin quick-connect harness

Double Din Chassis Dimensions: 4”H x 7”W x 7”D (102mm x 178mm x 178mm)

Specifications subject to change without notice.

CEA Power Ratings

Power Output: 13 watts RMS X 4 channels into 4-ohms @ < 1% THD+N

Signal to Noise Ratio: 70dBA below reference.

(Reference: 1 watt, 4-ohms)

Frequency Response: 20Hz to 20kHz, -3dB

Reference Supply Voltage: 14.4VDC

CD Player

Signal to Noise Ratio: >75dBA

Frequency Response: 20Hz to 18kHz, -3dB

Channel Separation: > 55dB @ 1kHz

D/A converter: 1Bit/Ch

FM Tuner

Tuning Range: 87.5MHz - 107.9MHz

Mono Sensitivity: 18dBf

50dB Stereo Quieting Sensitivity: 20dBf

Stereo Separation @ 1kHz: >30dB

Frequency Response: 30Hz to 12kHz, -3dB

18