MATERIALS INCLUDED IN THIS PACKAGE:
1)Over Head Docking Station (P/N
2)Lamp Harness (P/N 112B3110) – (1 pc)
3)2 Pin Power Wire Harness with choke (P/ N 112B3143) – (1 pc)
4)Hardware Package
Screws (#4) – (8 pcs)
Self Drilling Screws (#8) – (4 pcs)
Nut – (4 pcs)
5)Trim Ring (P/N
6)PODTVT (P/N
7)Mounting Bracket (P/N
8)Remote Control (P/N
1 | 2 |
|
| 3 |
| ON OFF AUTO |
|
|
|
| 4 |
| 5 | 6 |
7 | 8 |
|
|
|
| 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
| 7 | 8 | 9 |
|
| 0 |
|
|
|
TOOLS REQUIRED:
Nut Driver / Socket Wrench #2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears Wire Strippers
Upholstery hook tool (for removal of panels as necessary) Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe) Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary from vehicle to vehicle)
