1 | 2 |
| 3 |
14 | 4 |
13 | 5 |
12 | 6 |
| |
| 7 |
| 8 |
11 | 9 |
10
1.Infrared Sensor – Allows the remote control to operate the VDS102T and to control the shuttle when docked.
2.Three position Dome Light Switch
•Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.
•Off – The dome lights will not turn on in this position.
•On – Turns on the dome lights.
3.Dome Lights – Provide additional interior illumination.
4.Channel () Button – Used this button to increase the channel number to the desired number.
5.Channel () Button – Used this button to decrease the channel number to the desired number.
6.Auto Program Button – Allows the user to scan and store active TV stations into memory.
7.Screen Release – Moves in the direction of the arrow to release the drop down screen.
8.Shuttle
9.Security Lock Knob – Used to ensure that the shuttle is not released accidentally.
10.24 Pin Signal Interface Connector – Used to connect the shuttle to the docking station.
11.Shuttle Release – Press to release the shuttle from the docking station.
12.POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off.
13.FMM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).
14.Source Select Button – Used to select one of the three sources (DVD, AV1, TV)
