Remote Control Function Descriptions
*Function control is available on the unit and the remote control. **Not used in this model.
1.POWER Button*
Press this button to turn the VOD1021 on. Press the button again to turn the VOD1021 off.
2.SOURCE Button*
Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio / video source will change sources in the following order: DVD, AV1, AV2 and AUX.
3.AUTO MEMORY Button (AUTO PROGRAM Button)**
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficent levels are automatically stored.
4.SKIP/SEARCH Button**
This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When in the SEARCH mode, the TV will stop on all active channels.
5.ERASE/WRITE Button**
While tuned to a channel, pressing this button will either store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the LCD display screen, and the erased channel numbers are displayed in “RED”.
128-7092
8 of 28
