To mount the antenna, you will need four screws (not included) with a 1/4” head (e..g.., an M3 screw), and that are suitable for the material onto which you are affixing the antenna, (e..g.., wood, metal, etc..).. The screws should be spaced
Once you have found a suitable location for the antenna, route the antenna cable
to the Home Dock.. Be sure you avoid
any obstructions that could crimp, kink, or twist the cable.. Use protective grommets wherever rough openings are encountered.. If the antenna is installed outdoors, route the cable from the antenna location to the interior of the home or office, working the cable through the basement, under a window sill, etc.., and make adjustments to take up cable slack as necessary..
TIP! If your Indoor/Outdoor Home Antenna’s cable isn’t long enough, visit xmradio..com/accessories, or your favorite retailer, and consider a 50 ft.. Indoor/ Outdoor Home Antenna Extension Cable or a Wireless Home Signal Repeater..
If the signal is good for either Satellite or Terrestrial (or both), and you are hearing the audio from your Radio, the installation is complete..
If the signal reception is low, or intermittent, try another location for the antenna.. Verify that the antenna is pointed south, and that the antenna’s view of the sky is not blocked by a tree, a building, a bridge, or anything else.. Adjust 
until you are receiving a good signal..
19
