Audiovox XAPH1, XMp3i manual South

Home Installation

The Indoor/Outdoor Home Antenna’s reception can also be tweaked by opening or closing the antenna clamshell, and turning the antenna.. While observing the signal strength, make small adjustments to the angle of tilt of the clamshell until the highest possible signal strength is achieved.. If you have not wall-mounted the antenna, turn the antenna slightly to the right or left and observe if the signal strength increases.. For each tweak, allow a few seconds in each position to determine if the signal strength increases..

If the signal reception is good, but there is no audio, verify your audio connection..

SOUTH

•If you are connected to a stereo system, be sure the stereo system is set to the same AUX In or LINE In audio input source you chose and that the Stereo Audio Cable is fully connected.. If you still have no audio, try choosing a different input source..

•If you are connected to powered speakers, be sure the speakers are plugged into an outlet, and are turned On..

20