Aussie 4280 CAUTION

Grease Cup:

Remove the Grease Cup from the Wire Holder under the grill bowl after the grill ha s cooled completely. Scrape away

food and fat residue from the Grease Cup. Empty and wash the Grease Cup with hot so apy water and a cloth. A

replacement Grease Cup can be ordered online at ww w.AussieGrills.com

Grill Body:

Do not mistake the accumulation of grease and smoke residue for peeling or flaking paint. Remove excess grease an d/

or fat with a soft plastic or wooden scraper. Do not use steel wool or other abrasive cleane rs that can scratch painted

surfaces. It is not necessary to remove all the gre ase from the body. Wipe it down with paper towels or soft damp cloth.

Cooking Grid/Flavor Acti vators:

Clean the residue off with a baking soda and water solution. For stubborn stain s, use a non-abrasive scouring powder.

Do not use steel wool or other abrasive cleaners that can scratch the plate d surfaces. This can cause foods to stick on

the Cooking Grids.

All other Cleaning:

For further cleaning, use hot soapy water and a cloth, or nylon-bristled brush only. Do not immerse the G as Controls or

Manifold in water. (Avoid getting water in the Burner holes.)

Burners:

Burning off the residue after cooking will keep the Burn ers clean with normal usage, provided the Burners are op-

erating corre ctly. Clean the Burners annually, or whenever heavy build-up is found, to ensure that there are n o signs of

blockage (debris, insects) in the Burner portholes, the prim ary air inlet, or the neck of the Burners. See How to Clean

the Burners.

CAUTION

To reduce risk of laceration hazard, wear protective gloves when handling parts w ith sharp edges.

To reduce the risk of serious injury or death from explosion or fire:

• Store your LP gas grill in a cool dry place. D o not store an LP Gas Cylinder in temperatures greater than 125

degrees Fahrenheit. Never store an LP Gas Cylinder in a building, garage, indoors or any enclose d area.

• Store LP Gas Cylinders outdoors out of re ach of children.

• Never leave an LP Gas Cylinde r inside a vehicle.

• Even though your LP Gas Cylinder may ap pear to be empty, gas may still be present and the LP Gas Cylinder

should be transported and stored accordingly.

• Never store a spare LP Gas Cylinder und er or near the LP gas grill.

WARNING

1. Disconnect LP Gas Cylinder from grill and store outside, in a dry, well-ventilated area, away from any sources of

heat or ignition. Re-cap LP Gas Cylinder valve with the Safety Cap.

2. Cover the regulator opening with the plastic cap supplied with the grill.

3. Remove Burners and wrap with aluminum foil to prevent insects from entering th e Burner holes. Store wrapped

Burners on top of Cooking Grid.

4. You may wrap the Cooking Grid and Flavor Activators in aluminum foil and place inside the Hood or store inside

your dwelling.

5. Your grill may be stored indoors only if the LP Gas Cylinder is disconnected from the gas grill and store d outside.

6. Before next use, remove aluminum foil and reinstall Burners, Flavor Activators, and Co oking Grids.

7. Before using the grill after periods of storage or non-use (i.e. over winter), check your LP gas grill for gas leaks,

deterioration, proper assembly, and Burner obstructions.

7. Periodically check and tighten all nuts, bolts, and screws.