1 2 Installation (For Qualified Installers Only)

Alcove Installation Requirements

When the pellet stove is placed in a location where the ceiling height is less than 7' tall, it is considered an alcove installation. Because of the reduced height, the requirements listed below must be met.

•

Minimum height is 55"

•

Maximum depth is 48"

•

Minimum width is 41-1/4"

•

Minimum clearance of 7" on each side and 3" on back

Baffle Installation

Install the baffles included with the stove (see page 29 for details).

Door Seal Verification

The door is aligned prior to leaving the factory. However, shipping and installation may cause the door to become mis-aligned. Verify the door is correctly aligned and seals properly (see the section "Door Seal" under Yearly Maintenance).

Restrictor Adjustment

The restrictor “fine tunes” your appliance, ensuring it pulls the correct amount of air through the firebox. Altitude, vent configuration, and other factors make restrictor adjustment necessary for every installation.

NOTE: the optimal restrictor position will vary over time as soot builds up inside the exhaust system – make sure the homeowner knows how to visually inspect the flame and adjust the restrictor.

Not Enough Air

If clinkers (ashes that solidify into a clump) develop or the flame appears lazy and slow to blow the ash out of the firepot, pull the restrictor outward until the flame becomes active and the firepot holes remain clean. NOTE: If the restrictor is fully out, yet the firepot does not remain clean, the stove needs to be cleaned and checked for air leaks (see “Maintenance” section of this manual).

Too Much Air

If the flames are too active (small, flickering flames) or if burning pellets are expelled from the firepot, move the restrictor rod inwards until the flame slows down and no burning pellets are expelled. Another symptom of too much air is the heater “blowing the fire out” – a condition in which the pellets burn faster than they are fed (this is most common on low)

© Travis Industries

4070806

1 0 0 - 0 1 1 9 1 _ 0 0 0

Page 11 Page 13
Page 12
Image 12
Avalon Stoves Arbor PS manual Alcove Installation Requirements, Baffle Installation, Door Seal Verification
Page 11 Page 13

Arbor PS specifications

The Avalon Stoves Arbor PS stands out in the world of home heating solutions, combining advanced technology with exceptional design. This innovative wood stove is engineered to provide unmatched efficiency and style, making it a popular choice for homeowners looking to enhance both their comfort and aesthetic appeal.

One of the standout features of the Arbor PS is its powerful heating capacity. Designed to heat spaces of up to 2,000 square feet, it boasts impressive efficiency ratings that ensure optimal heat distribution, transforming cold living areas into warm, inviting spaces. Its ability to burn wood cleanly and efficiently means that homeowners can enjoy warmth without compromising air quality.

A key characteristic of the Arbor PS is its unique hybrid fuel technology. This technology allows for longer burn times and less frequent refueling, making it an incredibly convenient option. With a burn time of up to 12 hours, users can set their wood stove in the evening and wake up to residual warmth without the hassle of overnight maintenance.

The stove features an attractive, modern design, appealing to a wide range of decorating styles. Its sleek cast iron construction not only provides a rustic charm but also enhances durability, ensuring years of reliable performance. The large fire viewing window is another highlight, allowing users to appreciate the beauty of the flames while enjoying the heat it provides.

Safety is also a top priority with the Arbor PS. The stove is equipped with advanced safety features, including an airtight construction that minimizes the risk of air leaks and an adjustable air control for precise temperature regulation. Additionally, the stove’s high-efficiency design significantly reduces emissions, making it an eco-friendly option for environmentally conscious homeowners.

Installation is straightforward, thanks to the versatile flue outlet options which accommodate various setups. This flexibility, combined with the Arbor PS’s adaptability to both traditional and contemporary spaces, makes it a remarkable addition to any home.

In summary, the Avalon Stoves Arbor PS is a premier wood stove that excels in efficiency, aesthetics, and safety. It brings together cutting-edge technology and timeless design, making it an ideal choice for those seeking a reliable and stylish heating solution. With its combination of features, the Arbor PS is set to meet the demands of modern living while providing the comfort and charm that only a wood stove can offer.
Top Page Image Contents