Avanti CK301SHP Installation Instructions, Figure No, Before Using Your Compact kitchen

INSTALLATION INSTRUCTIONS

Before Using Your Compact kitchen

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

Kitchen Section		Refrigerator Section
•	1 Wire Shelf	•	2 wire shelves
•	Strainer	•	Instruction Manual

•Strainer Plug

•Backsplash and Assembly Screws

•Instruction Manual

•Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system of the refrigerator from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

Energy Saving Tips

•The Compact kitchen should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.

Installation of Your Compact Kitchen

Figure No. 1

NOTE:

1.In order to remove shelves of refrigerator, a clearance A of 10 inches is required. When built-in, no clearance is required on either side.

2.B = 30 inches minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet.

7