OPERATING YOUR ICE MAKER
Control Panel Description
Display | Meanings and How to operate |
| ADD WATER |
| Water level in reservoir is not sufficient to begin the ice making cycle. |
| Using the water cup included with the unit, fill the water reservoir up to the line |
| marked “MAX”. |
| ICE MAKING CYCLE STATUS |
| When the fan is rotating this means the unit is currently in the ice making cycle. |
| When the fan is stopped this mean the unit is not currently making ice. |
| If there is an “S” at the top right corner of the fan symbol, this means the small sized |
| ice cubes has been selected. |
| If there is an “L” at the bottom right corner of the fan symbol, this means the large |
| sized ice cubes has been selected. |
| DISPENSING ICE |
| The unit will show this icon while dispensing ice. |
| ICE BIN IS FULL |
| After you dispensed or removed the ice, unit will restart automatically. |
Button | Operation |
| Press this button to select the small sized ice cubes |
| This is the DEFAULT setting. |
| Press this button to select the large sized ice cubes. |
|
|
| Press this button to dispense cold water. |
|
|
| Press this button to turn the unit ON / OFF or to reset the ice making cycle. |
|
|
Ice Size Selector
The size selection will stay as selected unless changed or there is a power failure.
For the most efficient operation when ambient temperature is below 15°C (59ºF) use the small cube size setting.
9
