Additional call features
134
Additional call features
Contact your system administrator to determine if the following call
features are available on your IP Deskphone.
•“Using AutoDial Transfer” on page 134
•“Using the Buzz feature” on page 135
•“Using Call Page Connect to make an announcement” on
page 135
•“Using Centrex/Exchange Line Switchhook Flash” on page136
•“Charging a call or charging a forced call” on page137
•“Using Enhanced Override” on page 140
•“Using Forced Camp-on” on page 141
•“Overriding a busy signal” on page142
•“Using Privacy Release” on page 142
•“Using Radio Page” on page 143
•“Using Voice Call” on page 145

Using AutoDial Transfer

Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
CentrexSHF