Basic Call Handling Features
Redial
The Redial feature automatically redials a previously dialed extension or outside number (up to 24 digits). Your phone will store the up to ten of the last numbers dialed.
Note: If you have dialed the same number twice in succession, it will only have one appearance in the redial list.
To redial previously dialed number:
1.Press 
Redial. Use 
and 
to step through the entries. When you have located the required number, press the associated key.
Hold
If, with a call in progress, a second call arrives and is shown against a Call Appearance key, you can then Hold the first call and answer the second call.
To put an existing call on hold:
1. Press 
Hold or the Call Appearance button with the symbol against it. The symbol changes to
;showing that the line is on hold.
2.Answer the second call by pressing the Call Appearance button with the 
symbol against it. The symbol changes to 
; showing that the line is connected.
To return to the held call:
1.If you have a call in progress, then first put that call on hold as above.
2.To retrieve a held call, simply press the Call Appearance button with the 
against it.
Notes:
1.After a 
hold icon changing for a few moments to 
and the phone ringing.
2.If the system feature AutoHold is on (consult your System Administrator) then you can hold an active call (
) by pressing the second call’s Call Appearance button (
). If AutoHold is off, then pressing the second call’s Call Appearance button (
) will drop the first call.
3.To transfer a held call see Transfer.
5410/2410 Phone User Guide | Page 11 |
IP Office | Issue 3f (7th October 2005) |
