Avaya 2520-24-POE 8. Conclusion

TMA; Reviewed:
SPOC 11/16/2009
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
8 of 10
ProC2520-24PoE
 Connect the Avaya PD to a PoE enabled port on the ProCurve 2520-24-PoE Switch and
verify that the PD powers on successfully. If the PD does not power on, enter the command
show power-over-ethernet <portlist> where <portlist> is the name of the port on the
ProCurve 2520-24-PoE Switch.
Status and Counters - Port Power Status for port 1
Power Enable : Yes
LLDP Detect : disabled
Priority : low Configured Type :
AllocateBy : usage Value : 17 W
Detection Status : Delivering Power Class : 2
Over Current Cnt : 0 MPS Absent Cnt : 0
Power Denied Cnt : 0 Short Cnt : 0
Voltage : 49.4 V Current : 96 mA
Power : 4.7 W
 Verify that Avaya 1600/5600/9600 Series IP Telephones have successfully registered to
either Avaya AuraTM Communication Manager or Avaya IP Offce
o For the Avaya 1600/9600 Series IP Telephones check Avaya AuraTM
Communication Manager
o For the Avaya 5600 Series IP Telephones check Avaya IP Office.
8. Conclusion
These Application Notes describe the steps for configuring the HP ProCurve 2520-24-PoE
Switch to provide inline PoE to Avaya IP telephones. It was verified that PoE was delivered
successfully to all Avaya PD’s tested.