Avaya 2520-24-POE Verification Steps, ProCurve Switch 2520-24-PoE#show power-over-ethernet brief

7. Verification Steps

The following steps may be used to verify the configuration of PoE related parameters:

∙Verify that the PoE Operational Status in ON at the system level by entering the command show power-over-ethernet.

ProCurve Switch 2520-24-PoE# show power-over-ethernet

Status and Counters - System Power Status

Pre-standard Detect : On

Operational Status : On

Usage Threshold (%) : 80

Chassis power-over-ethernet:

Total Available		Power	:	195	W
Total	used Power		:	5	W +/- 6W
Total	Remaining	Power	:	190	W

∙Verify that Power Enable is Yes at the port level by entering the command show power- management brief.

ProCurve Switch 2520-24-PoE#show power-over-ethernet brief

Status	and Counters - Port		Power	Status
PoE	Power	Power	Alloc	Alloc		Actual Configured		Detection	Power
Port	Enable	Priority	By	Power		Power Type		Status	Class
-----	+ -------	---------	-----	------		------ -----------		----------- ------
1	Yes	low	usage	17	W	0.0	W	Delivering	0
2	Yes	low	usage	17	W	0.0	W	Searching	0
3	Yes	low	usage	17	W	0.0	W	Searching	0
4	Yes	low	usage	17	W	0.0	W	Searching	0
5	Yes	low	usage	17	W	0.0	W	Searching	0
6	Yes	low	usage	17	W	0.0	W	Searching	0
7	Yes	low	usage	17	W	0.0	W	Searching	0
8	Yes	low	usage	17	W	0.0	W	Searching	0
9	Yes	low	usage	17	W	0.0	W	Searching	0
10	Yes	low	usage	17	W	0.0	W	Searching	0
11	Yes	low	usage	17	W	0.0	W	Searching	0
12	Yes	low	usage	17	W	0.0	W	Searching	0

TMA; Reviewed:	Solution & Interoperability Test Lab Application Notes	7 of 10
SPOC 11/16/2009	©2009 Avaya Inc. All Rights Reserved.	ProC2520-24PoE