Avaya 4600 Assembling the 4600 Series IP Telephone

4600 Series IP Telephone Installation Guide
Assembling the 4600 Series IP Telephone
2-4
Assembling the 4600 Series IP Telephone 2
Use the following procedure to assemble the 4600 Series IP Telephone.
During the assembly, refer to Figure 2-1 on page 2-5.
The last step in assembling the 4600 Series IP Telephone must be plugging in the power
cord into the power source.
Be careful to use the correct jack when plugging in the telephone. See the 4606 /4612/
4624 IP Telephones Set Up Quick Reference for directions and illustration of how cords
connect to jacks. The jacks are located on the back of the telephone housi ng. The left
jack is for the primary Ethernet cable and the right jack is for the secondary Ethernet
cable (connected to the PC). These jacks are flanked by icons to represent thei r correct
use.