Requirements
Hardware Requirements
3-3
Hardware Requirements, continued: 3
Be sure the appropriate circuit pack(s) are administered on your call ser ver. See the call
server’s hardware guide for more detail.
A Category 5e LAN. If the telephones are to be powered from the LAN, the power supply must
be designed to the IEEE 802.3af standard for LAN powering.
Electrical power provided to each phone by one of the following two sources :
— A Telephone Power Module (DC power jack) (must be ordered separately, except for the
4630, which does come with its own power brick).
— IEEE 802.3af, if the LAN supports this powering scheme (note that the 4630 cannot be
powered this way, but the 4630SW can be powered this way).
Verify that the 4600 Series IP Telephone package includes the following components:
— 1 telephone set.
— 1 AB1C handset.
— 1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged into the
telephone and the handset.
— 1 Category 5e modular line cord for the connection between the IP Telephone and the
Ethernet wall plug.
— Non-system-specific safety and installation documentation.
— Power brick (4630 only).
— Stylus (4630/4630SW IP Telephones only).
You may need a Category 5e modular line cord for the connection from the 4600 Series IP
Telephone to the PC.
Refer to the 4600 Series IP Telephone Installation Guide.
The IP telephones work the same on all DEFINITY®/MultiVantageTM platforms.