4600 Series IP Telephone LAN Administrator’s Guide
The Reset Administrative Option
5-8
The Reset Administrative Option 5
As indicated in some troubleshooting procedures, sometimes it is appro priate to reset the 4600
Series IP Telephone. Procedures on how to do so are printed below, and can also be found in
Chapter 3 of the 4600 Series IP Telephone Installation Guide. The following is the list of
parameters, settings, etc., that are reset to default values (including "null" as applicable) when the
Reset procedure is completed:
All user-settable options (if applicable to the specific telephone).
All user-created Speed DIal labels and associated telephone numbers (if applicable to the
specific telephone).
All user-generated administrable button labels (if applicable to the specific telephone).
Registration extension and password.
All values administered by local procedures, in accordance with Chapter 3 o f the 4600 Series
IP Telephone Installation Guide.
All values previously downloaded via DHCP or from a TFTP settings file (alt hough, of course,
these values are generally restored when the telephone goes through registr ation again after
the reset.
Reset System Values 5
Use the following procedure to reset all system initialization values to the application software
default values.
WARNING:
This procedure erases all static information, without any possibility of r ecovering the data.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 7 3 7 3 8 # (Mute R E S E T #)
The following text is displayed left-justified at the top of the display:
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons. The 4630 and 4630SW IP Telephones do not have a dedicated Hold
button; for all other 4600 Series IP Telephones, pressing the Hold button instead of
the Mute button will also work.
Reset values?
*=no #=yes