Avaya AP100, AP208, AP201 specifications AP configuration, References, no preamble-short

Meru Networks WLAN Controllers with AP100, AP201, AP208	Configuration Guide
	Field Verified

AP configuration

Short preamble should be turned off per AP for wireless IP telephones. Under configuration of interface Dot11Radio this should be disabled.

Interface Dot11Radio <ap-id> <ap-idx>

no preamble-short

A

An AP boot-script for AP configuration is required to support the SVP solution.

Create a file, svpconfig.scr, containing the following lines, and copy this to the controller into the directory /opt/meru/ATS/scripts/.

For Release 3.1.x and older, use the following settings in svpconfig.scr:

qos if wmac0 set qos_scheduling_discipline 1

qos if wmac0 set mav 0 wmac tx_rate decrease 2 if 1 set be1_queue_len 48 vayu queuepackets wmac1 4 vayu queuedspackets wmac0 4

For Release 3.2 and higher, use the following settings in svpconfig.scr:

qos if wmac0 set qos_scheduling_discipline 1

qos if wmac0 set mav 0

Then configure the boot-script for each access point.

ap 1

boot-script svpconfig

References

Meru Networks Configuration Reference, available at http://ftp.merunetworks.com/

Page 9