Chapter 2 | Installation |
Figure 2 Rear view of a P110 switch stack, showing how the switches are linked via the P110 Exoplane cables. A P110 NMA resides in the uppermost switch.
6.Two terminators are supplied with the P110 NMA. Insert the two terminators into the lowest two connectors at the bottom of the stack, as shown in Figure 2.
7.Turn on the mains power to the stack, by individually switching on each switch.
8.Connect the
If the P110 NMA in the stack contains the correct software version (as specified in the P116T Stackable Switch Release Note) or higher, the stack is now fully operational.
When a new version of the P110 NMA software becomes available, you should perform software download to benefit from the extra capabilities provided. See the P110 NMA Installation Guide for details.
P116T Stackable Switch Installation Guide | 9 |
