Setting Audio Output
1.Press SETUP on the remote control.
2.Use the direction keys(▲▼◄►) to select AUDIO SETUP and its
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
Changing AUDIO output
Note:
SPDIF/OFF:select this when you do not want to have digital audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby Digital or DTS decoder which gives 5.1 channel sound.
SPDIF/PCM:select this when the external amplifier has no decoder.
