AVE operation manual TCPIP232 Setups, Stand alone Setup, VSSI-Pro Setup

TCPIP232 Setups

The user must be careful to unplug the LAN cable from the ATM. The ATM has the protection when there is no comunication between the ATM and Host Server in limited time your ATM will be offline automatically. This peroid is called the “ATM Time Out’. This time out depends on your ATM system. It is approximately 6-10 seconds.

Stand alone Setup:

Connect the PC/DVR Cable which comes from the TCPIP232 adapter to your laptop. Power up your TCPIP232 and your laptop and run TCPIP232 Setup to program the IP Address of the TCPIP232. This IP address will be the same as the ATM machine. Un- plug your PC/DVR Cable from your laptop and plug it to your DVR Com port. Now your need to program your DVR to display text insertion.

VSSI-Pro Setup

Connect the TCPIP232 adapter to the VSSI-Pro with the provided cable, connect video, ATM LAN and power up both units.

1.Enter the VSSI-Pro Main Menu by simultaneously pressing and holding the DOWN and UP while then press and releasing RESET Button. The main menu will be displayed as below. So move cursor to ATM Select by press UP or DOWN button. Press SET to enter the ATM Select Menu.

MAIN PROGRAMMING MENU

*ATM SELECT SCREEN SETUP TEXT DISPLAY COMMUNICATION EXCEPTION REPORT ALARM OUTPUTS TEST/DEMO MODE DWN/UP LOAD SETUP

HELP

2.On ATM Select Menu, Move cursor to TCPIP Interface then press SET to enter

SDLC BSYNC ASYNC CAMERA PORT

JOURNAL PRINTER *TCPIP INTERFACE CUSTOM

EXIT

3.The Menu in TCPIP Interface will be displayed as below:

*TCPIP FORMAT I TCPIP DEBUGING EXIT.

PAGE 4