Avenview DVI-VIDEOWALL-4 1.5 Package Contents , 1.6 Device Features

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

- DVI-VIDEOWALL-4 x 1

- DVI to DVI/VGA Y-Cable x 1

- VGA to Component Adapter x 1

- DVI to VGA Adapter x 1

- 30cm DVI to DVI Cable x 1

- RS232 to USB Adapter x 1

- Software CD x 1

- AC Power Supply x 1

1.6 Device Features

The DVI-VIDEOWALL-4 has four inputs and accepts both graphics and video signals, which come from

computers and NTSC/PAL video sources respectively. There is a concept of main channel and sub channel for

this device. You can pick up two of the four inputs, one is for main channel and the other is for sub channel,

and then the DVI-VIDEOWALL-4 will display two of them simultaneously on the same screen. Figure 2 shows

the rear panel connectors for the video inputs of a DVI-VIDEOWALL-4 and Table 1 illustrates how you can

connect video devices and display to DVI-VIDEOWALL-4.

Rear Panel

To reset the DVI-VIDEOWALL-4 to factory default settings: Turn on the DVI-VIDEOWALL-4

then switch both DIP Switches simultaneously up and down to reset the unit to factory

default settings

The I/O ports support various resolutions from 640x480 up to 1920x1200. For more details

see Supported Modes section.