Avenview specifications HDMI IN of HDMI-C5-4/HDMI-C5-8 To connect to the HDMI connector, a

e.EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue.

If noise or an unstable image is seen on the local HDMI monitor, adjust the EQ control for best image display quality.

f.LINK OUT: HDMI signal can be extended/cascaded over “LINK OUT” port by Cat 5 / 5e / 6 cable. The signal can be received by:

-HDMI-C5-R:The maximum HDMI distance is: < 30m (100 ft) for 480 / 720p / 1080i or <15m for 1080p.

-LINK IN of HDMI-C5-SR:Maximum cascading distance is: <80m (275 ft) for 480p, 70m (230 ft) for 720p / 1080i or <30m (100 ft) for 1080p.

-HDMI IN of HDMI-C5-4/HDMI-C5-8:To connect to the HDMI connector, a

HDMI-C5-R Receiver is required. Maximum cascading distance is: <80m (275 ft) for 480p, 70m (230 ft) for 720p / 1080i or <30m (100 ft) for 1080p.

Three ways of extending HDMI signal from Transmitter HDMI-C5-S

www.avenview.com 7