Avenview specifications Installation SW-HDM3D-C5-4X4

1.9Installation (SW-HDM3D-C5-4X4)

To setup Avenview SW-HDM3D-C5-4X4 follow these steps for connecting to a device:

1.Connect all sources to HDMI Inputs on the 4X4 HDMI over CAT5 Matrix Switch (SW-HDM3D-C5-4X4)

2.Connect each DDC output on the SW-HDM3D-C5-4X4 to respective DDC input on the remote receiver HDM3D-C5SW-R

3.Connect each TMDS output on the SW-HDM3D-C5-4X4 to respective TMDS input on the remote receiver HDM3D-C5SW-R

4.Connect IR emitter cable to the SW-HDM3D-C5-4X4 and direct the IR emitter to the build-in IR receiver of the sources

5.Connect the +5V 6A DC power supply to the SW-HDM3D-C5-4X4

6.Power on all HDMI sources

7.Power on the SW-HDM3D-C5-4X4

www.avenview.com 12