www.avenview.com
7
1.7.1 SW-HDM3D-C5-4X4 Front Panel
1. Port 1-4 SELECT: Push-in button for selecting
input channel
2. Port 1-4: Input source channels mapping LED for
each output channel
3. HP 1-4: Connection status indicator LED for each
output channel
4. INPUT: Input source indicator LED
5. IR SENSOR: IR receiver
6. Power: Power indicator LED
1.7.2 SW-HDM3D-C5-4X4 Rear Panel
1. ON-OFF: Power ON/OFF
2. RS-232: RS-232 control port
3. +5V DC: 5V DC power jack
4. MAIN SW: DIP switches (see DIP Switch section)
5. SW 1-4: DIP switch (see DIP Switch section)
6. HDMI 1-4: HDMI inputs
7. IR OUTPUT 1-4: IR extender jacks for individual
HDMI source control with IR blasters
8. CAT-5 OUTPUT 1-4: RJ-45 TMDS/DDC outputs for
each output channel
9. MAIN IR: IR extender jack for all HDMI source
control [default socket for IR blaster]