SMART MOTION SEARCH (search by motion event):

1.In SMART MOTION SEARCH window, the START TIME and END TIME show the date and time from when the recording begins and ends.

2.Use the ▲ and ▼ press to set SEARCH START TIME and SEARCH END TIME for searching period.

3.Then, Select the CHANNEL that wants to search.

4.And then, select SEARCH AREA to mark an area to search. Use the ▲ , ▼ , ▼ , and ▼ to move the

block and press to confirm. To exit, press .

5. To start searching, select the SEARCH EXECUTION.

6. The searching result will be list out. Using the ▲

 

and

▼ buttons to go up and down and press

 

to

 

 

make a selection.

 

 

7.After make a selection, the DVR system will start playback automatically.

SMART MOTION SEARCH

START

TIME:

2009 / 05 / 09 11:36:21

END

TIME:

2009 / 05 / 18

11:36:21

 

 

2009 / 05 / 09

11:36:21

SEARCH START TIME

:

SEARCH END TIME

:

2009 / 05 / 18 11:36:21

CHANNEL

:

01

 

SEARCH AREA

 

 

 

SEARCH EXECUTION

SEARCH AREA SETUP SCREEN

Listed below are the symbols of recording condition that will display on surveillance screen while playback mode and record mode:

A – Always Recording

It records non-stop and automatically continue recording when interrupted. S – Sensor Recording

It records when the sensor has activated. M – Motion Recording

It records when any movement is detected B – Button Recording

It records when the REC record button is pressed.

N – NO Recording

It doesn’t record at all

The “ ” play symbol would appear beside the channel number when you are in playback mode.

18