Name | Function |
(11) Event List | Select the event you want to playback. The event list only available when |
| user select to playback in DVR Recorded File(HD). |
(12) | Camera ID | Show the number of cameras that are being viewed. When you are in single | |
|
| screen mode, click the camera ID number to switch and view other camera. | |
(13) | Sound /Sound bar | Turn on and off the sound | |
Increase and decrease the volume | |||
|
| ||
(14) | To enhance the video quality. Set the | ||
capturing motionless picture and #2, if it captures lots of movement. | |||
|
| ||
|
| - When playback *.dvr file, click watermark button to verify the correction of | |
(15) | Watermark | playback video. | |
- When playback file from hard disk and *.avf file, click watermark to call | |||
|
| ||
|
| out ImageVerification application. (see also Chapter 6) | |
(16) | Split Screen Mode | Select from different screen view to playback the recorded video file of the | |
|
| entire camera or one camera on screen. |
4.3.1 To Cut and Save the Portion of the Recorded Video
1.Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark.
2.Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to end the cut. Then, click Segment to set the end mark. To cancel segmentation, click Segment button again.
3.Click Output button to save the wanted portion.
4.In the Save As dialog box, locate on where user wants to save the file, type the filename, and select the video format.
37