OSD MENU | Description |
|
|
| GENERAL SETUP | |
|
| CIF |
RECORD MODE |
| |
DVR NAME |
| COMPANY |
TIME STAMP |
|
|
WATERMARK |
|
|
AUTO RECORD |
|
|
|
|
|
|
|
|
WATERMARK
Enable/disable the recorded image authenticates protection. User can use ImageVerificiation application to identify the image that has been watermark protected.
AUTO RECORD
Enable/disable auto continue recording when interrupted (i.e., power breakdown, video playback or configuration setup). It starts to record after 10 second of idleness. This is applicable in Always Record mode.
CHANNEL SETTING SETUP
|
|
| CH1 | CH2 | CH3 | CH4 | |
ENABLE |
|
|
|
|
|
|
|
RECORD |
|
|
|
|
|
|
|
AUDIO RECORD |
|
|
|
|
|
|
|
PREVIEW |
|
|
|
|
|
|
|
ENCRYPTION |
|
|
|
|
|
|
|
MAX. FPS | 30 | 30 | 30 | 30 | |||
FPS | 30 | 30 | 30 | 30 | |||
QUALITY |
|
| BEST | BEST | BEST | BEST | |
FPS(ALARM) | 30 | 30 | 30 | 30 | |||
QUALITY(ALARM) |
|
| BEST | BEST | BEST | BEST | |
|
|
|
|
|
|
|
|
| 120 | / | 120 | FPS |
|
|
|
|
|
|
|
|
|
|
|
Current total fps | Total fps value that | |
value that user | ||
user can set | ||
has set | ||
|
CHANNEL SETTING
Configure the parameters of each channel.
ENABLE
Enable/disable the channel to display the video on the surveillance screen. If the channel is disabling, there won’t be any video display and recording.
RECORD
Enable/disable the channel number to record video.
i | The channels are enabled in the ENABLE can be set |
for video recording. | |
|
|
AUDIO RECORD
Enable/disable audio recording. To record sound, make sure the audio input device (ex: microphone) is connected to the DVR unit.
PREVIEW
Enable/disable the video preview on the surveillance screen.
MAX. FPS
Display the maximum frame rate of recording that user has set. Maximum fps total value depends on the RESOLUTION that user has chosen.
FPS
Set the number of frames per second to be recorded. The higher the frame rate, it uses more hard disk space.
QUALITY
Select the video quality setting from BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW. Choosing higher quality allows user to record less hours but the quality of the recorded video is better.
FPS(ALARM)
Set the number of frames per second to be recorded when alarm has occurred. The higher the frame rate, it uses more hard disk space.
QUALITY(ALARM)
Select the video quality (BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW) of alarm recording. Choosing higher quality allows user to record less hours but the quality of the recorded video is better.
22