Name | Function |
| |
|
|
|
|
(5) | Audio Out | Output the audio signal to a audio out device such as speaker | |
|
|
|
|
|
| i | The audio output device has its own power supply is necessary. |
|
|
| |
|
|
| |
(6) | Sensor In | Support 4 sensor devices | |
|
|
| |
(7) | Alarm Out | Support 1 relay device (Relay: 1A @ 125V AC/30V DC) | |
|
|
| |
(8) | For PTZ camera connection and firmware update | ||
|
|
| |
(9) | FAN speed Switch | Adjust fan speed(High/Low) according to the actual environment situation | |
| We do strong recommend that adjust the fan speed to High when the |
| operating environment is over 30 ℃. |
|
|
|
|
(10)12V DC | Power cable connection |
|
|
1.5Setting Up the DVR Unit
1.5.1 Installing the Hard Disk
i | For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Product/ → |
AverDiGi EB3004 MD → Hardware Recommendations |
The “compatible hard disks” indicated in the above recommendation list only means that these commercially available hard disks were tested with AVerMedia products and functioned well under normal operation conditions. AVerMedia does not guarantee or provide warranties, explicitly, implied or statutory with respect to the reliability of the hard disk function or its compatibility. In no event AVerMedia shall be liable for damages, with respect to any business interruption of clients, lost profits, loss of programs or other data on your information handling system or otherwise. This includes direct, indirect, incidental, special, or consequential damages, resulting from the incompatibility caused by the usage of these hard disks, even if AVerMedia has expressly advised about the risk of such damages. The entire risk arising out of the use of any information attached here with is borne by the recipient.
The DVR unit allows user to install one hard disk. Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws | 2. Push the cover backward and lift |
3