Leveling the Press
1.With the heat on, set the dwell timer for one (1) second or less; put a light colored cloth or paper on the base plate (bottom platen); then, put a piece of carbon paper, carbon side down. Run the machine trough a cycle. The carbon paper will leave a picture of sealing area on the cloth or paper. THE COLOR SHOULD BE EVEN. A dark area indicates more pressure in that area and should be corrected.
2.If the out of level condition is in either the front or back, the base plate can be tilted.
3.Loosen the bolt to lower front and raise the back.
4.Tighten to raise the front, lower the back (see fig below)
Users Manual | General Description • 9 |
