✂
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
Quick reference guide
Arming
■To arm, press 
. When the system arms, you will hear a short chirp, and the parking lights will flash once.
Arming while driving
■To arm the system while driving, press 
on your transmitter while the vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.
Arming while driving
■To arm the system while driving, press 
on your transmitter while the vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.
Disarming
■To disarm, press 
. You will hear two chirps, and the parking lights will flash twice.
High security disarm
■For high security disarm, press 
on your transmitter and the siren will stop sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a transmitter
■Turn on the ignition. Press the Valet button within 15 seconds. The system should now disarm. If it does not, you may have waited too long, so turn the ignition off and on and try again.
Silent Mode™
■Pressing 
briefly before arming or disarming will eliminate the confirma- tion chirp(s) for that one operation only.
Panic Mode
■Press 
for 2 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press 
on the transmitter again.
To remote start the vehicle
■Press 
twice within 3 seconds. The parking lights will turn on (if connected) and the vehicle will start and run for the programmed period of
time.
© 2008 Directed Electronics — All rights reser ved | 37 |
